38
Maintenance
If needed, use a soft cloth lightly dampened with a mild detergent to clean the display. Avoid abrasive
cleaners or solvents that may damage the display.
Calibration
An instrument calibration, e.g. for the purpose of compliance with ISO quality standard requirements, is
recommended once a year. Please contact your SPM representative for service, upgrading the software
or calibration.
Maintenance and calibration
EU Directive on waste electrical and electronic equipment
WEEE is EU Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and
electronic equipment.
The purpose of this directive is, as a first priority, the prevention of waste electrical and electronic equip-
ment (WEEE), and in addition, the reuse, recycling and other forms of recovery of such wastes so as to
reduce the disposal of waste.
This product must be disposed of as electronic waste and is marked with a crossed-out wheeled bin
symbol in order to prevent it being discarded with household waste.
Once the life cycle of the product is over you can return it to your local SPM representative
for correct treatment, or dispose of it together with your other electronic waste.
To Next Page
Loading...
Need help?
General