Becker active.5 LMU plus BE B10 - Selecting the vehicle profile (depending on model)

69
NAVIGATION MODE >>>
Selecting the vehicle profile (depending on
model)
This setting influences the calculation of
the expected time of arrival and blocks
e.g. motorways for the bicycle setting.
> Select the mode of travel or the
required vehicle profile after pressing
the
Vehicle button.
The different profiles are displayed and
you can select the desired profile by
pressing the appropriate button.
Saved profile truck with trailer
Saved bus profile
Saved mobile home profile
General truck profile
Car profile
Motorcycle profile
Bicycle profile
Pedestrian profile
After selecting the desired profile, it is
displayed.
You can now change the selected profile,
as described under "Truck and mobile
home functions (depending on model)"
on page 70 (only for selected models).
> Press the settings button
or button.
The window for selecting the maximum
speed is displayed.
Select a speed and exit the speed menu
with the back button .
> Exit the vehicle selection menu, too,
with the back button .
The selected vehicle type is now
displayed.
The required profile is displayed once
selected.
1
2
3
4 5 6 7 8
5
6
7
8
1
2
3
4
5
6
7
8