Activating/Deactivating upper anti-freeze
mechanism
Put the transmitter into master mode.
Select the tubular drive by pressing the button until the tubular drive con-
firms.
All the following settings will then only be executed for this device.
Open the shading solution to the upper limit position.
Then re-press the programming button and also the
STOP and UP buttons for approx. 5seconds.
► The tubular drive clicks 3 times to confirm.
Fly screen protection function
If the fly screen protection function is activated (if available in the receiver),
obstacle detection is activated after a revolution of the barrel of approx. 140°
from the upper limit position. If the roller shutter curtain meets an opened fly
screen door, the drive stops and returns to the upper limit position.
The fly screen protection function is deactivated on delivery.
Both limit positions must be set before the fly screen protection function can
be activated.
When both or individual limit positions are deleted, this set
function is deleted as well.
23
To Next Page
Loading...
Need help?
General
