21.2 Homing 2
Homing without reference switch, negative direction of motion, positive rotation, with zero-mark
Warning!
Hardware limit-switches must be present and connected.
The
limit-switch functions 2, PSTOP and 3, NSTOP must be switched on.
Homing without reference switch, positive direction of motion, positive rotation, with zero-mark
Warning!
Hardware limit-switches must be present and connected.
The
limit-switch functions 2, PSTOP and 3, NSTOP must be switched on.
60 Setup Software
Screen page "Homing" 07/03 BECKHOFF
To Next Page
Loading...