21.4 Homing 4
Homing without reference switch, negative direction of motion, positive rotation, without zero-mark
Warning!
Hardware limit-switches must be present and connected.
The
limit-switch functions 2, PSTOP and 3, NSTOP must be switched on.
Homing without reference switch, positive direction of motion, positive rotation, without zero-mark
Warning!
Hardware limit-switches must be present and connected.
The
limit-switch functions 2, PSTOP and 3, NSTOP must be switched on.
62 Setup Software
Screen page "Homing" 07/03 BECKHOFF
To Next Page
Loading...