Beckhoff CB3064 Series - Page 44

Chapter: BIOS Settings Advanced
page 44 Beckhoff New Automation Technology CB3064-xxxx
6.3.1.1 PEP Constraints Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ PEP Constraints Configuration │Add CPU in PEP mitigation list │
│ │ │
│ PEP CPU [Enabled] │ │
│ PEP Graphics [Disabled] │ │
│ PEP ISP [Disabled] │ │
│ PEP SATA [Storage Controller] │ │
│ PEP UART [Enabled] │ │
│ PEP I2C0 [Enabled] │ │
│ PEP I2C1 [Enabled] │ │
│ PEP I2C2 [Enabled] │ │
│ PEP I2C3 [Enabled] │ │
│ PEP I2C4 [Enabled] │ │
│ PEP I2C5 [Enabled] │────────────────────────────────│
│ PEP SPI [Enabled] │→←: Select Screen │
│ PEP XHCI [Enabled] │↑↓: Select Item │
│ PEP Audio [Enabled] │Enter: Select │
│ PEP EMMC [Enabled] │+/-: Change Opt. │
│ PEP SDXC [Enabled] │F1: General Help │
│ [Enabled] │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
 SPEP CPU
Options: Disabled / Enabled
 PEP Graphics
Options: Disabled / Enabled
 PEP ISP
Options: Disabled / Enabled
 PEP SATA
Options: No Constraint / Storage Controller
 PEP UART
Options: Disabled / Enabled
 PEP I2C0
Options: Disabled / Enabled
 PEP I2C1
Options: Disabled / Enabled
 PEP I2C2
Options: Disabled / Enabled
 PEP I2C3
Options: Disabled / Enabled
 PEP I2C4
Options: Disabled / Enabled
 PEP I2C5
Options: Disabled / Enabled