Beckhoff CB3064 Series - System Agent (SA) Configuration

Chipset Chapter: BIOS Settings
Beckhoff New Automation Technology CB3064-xxxx page 81
6.4.1 System Agent (SA) Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ System Agent (SA) Configuration │Graphics Configuration │
│ │ │
│ SA PCIe Code Version 1.7.0.0 │ │
│ VT-d Supported │ │
│ │ │
│► Graphics Configuration │ │
│ │ │
│ │ │
│ VT-d [Enabled] │ │
│ CHAP Device (B0:D7:F0) [Disabled] │ │
│ Thermal Device (B0:D4:F0) [Disabled] │ │
│ GMM Device (B0:D8:F0) [Enabled] │ │
│ CRID Support [Disabled] │────────────────────────────────│
│ Above 4GB MMIO BIOS assignment [Disabled] │→←: Select Screen │
│ │↑↓: Select Item │
│ │Enter: Select │
│ │+/-: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
 Graphics Configuration
Sub menu: see "Graphics Configuration" (page 82)
 VT-d
Options: Disabled / Enabled
 CHAP Device (B0:D7:F0)
Options: Disabled / Enabled
 Thermal Device (B0:D4:F0)
Options: Disabled / Enabled
 GMM Device (B0:D8:F0)
Options: Disabled / Enabled
 CRID Support
Options: Disabled / Enabled
 Above 4GB MMIO BIOS assignment
Options: Disabled / Enabled