Advanced Chapter: BIOS Settings
Beckhoff New Automation Technology CB3064-xxxx page 69
6.3.15 USB Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ USB Configuration │Enables Legacy USB support. │
│ │AUTO option disables legacy │
│ USB Module Version 19 │support if no USB devices are │
│ │connected. DISABLE option will │
│ USB Controllers: │keep USB devices available │
│ 1 XHCI │only for EFI applications. │
│ USB Devices: │ │
│ 1 Keyboard │ │
│ │ │
│ Legacy USB Support [Enabled] │ │
│ XHCI Hand-off [Enabled] │ │
│ USB Mass Storage Driver Support [Enabled] │ │
│ Port 60/64 Emulation [Enabled] │────────────────────────────────│
│ │→←: Select Screen │
│ USB hardware delays and time-outs: │↑↓: Select Item │
│ USB transfer time-out [20 sec] │Enter: Select │
│ Device reset time-out [20 sec] │+/-: Change Opt. │
│ Device power-up delay [Manual] │F1: General Help │
│ Device power-up delay in seconds 5 │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
USB Module Version
Options: none
USB Devices
Options: none
USB Controllers
Options: none
Legacy USB Support
Options: Enabled / Disabled / Auto
XHCI Hand-off
Options: Enabled / Disabled
USB Mass Storage Driver Support
Options: Disabled / Enabled
Port 60/64 Emulation
Options: Disabled / Enabled
USB transfer time-out
Options: 5 sec / 10 sec / 20 sec
USB transfer time-out
Options: 10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay
Options: Auto / Manual
Device power-up delay in seconds
Options: 1..40