Beckhoff CB3064 Series - PCI Subsystem Settings

Chapter: BIOS Settings Advanced
page 62 Beckhoff New Automation Technology CB3064-xxxx
6.3.10 PCI Subsystem Settings
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ PCI Bus Driver Version A5.01.12 │Value to be programmed into │
│ │PCI Latency Timer Register. │
│ PCI Devices Common Settings: │ │
│ PCI Latency Timer [32 PCI Bus Clocks] │ │
│ PCI-X Latency Timer [64 PCI Bus Clocks] │ │
│ VGA Palette Snoop [Disabled] │ │
│ PERR# Generation [Disabled] │ │
│ SERR# Generation [Disabled] │ │
│ Above 4G Decoding [Disabled] │ │
│ │ │
│ │ │
│► PCI Hot-Plug Settings │ │
│ │────────────────────────────────│
│ │→←: Select Screen │
│ │↑↓: Select Item │
│ │Enter: Select │
│ │+/-: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
 PCI Latency Timer
Options: 32, 64,...224, 248 PCI Bus Clocks
 PCI-X Latency Timer
Options: 32, 64,...224, 248 PCI Bus Clocks
 VGA Palette Snoop
Options: Disabled / Enabled
 PERR# Generation
Options: Disabled / Enabled
 SERR# Generation
Options: Disabled / Enabled
 Above 4G Decoding
Options: Enabled / Disabled
 PCI Hot-Plug Settings
Sub menu: see "PCI Hot-Plug Settings" (page 63)