Beckhoff CB3064 Series - Page 94

Chapter: BIOS Settings Chipset
page 94 Beckhoff New Automation Technology CB3064-xxxx
6.4.2.2 USB Configuration
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ USB Configuration ▲│Options to disable Compliance │
│ █│Mode. Default is FALSE to not │
│ XHCI Disable Compliance Mode [FALSE] █│disable Compliance Mode. Set │
│ █│TRUE to disable Compliance │
│ USB Port Disable Override [Select Per-Pin] █│Mode. │
│ USB SS Physical Connector #0 [Enabled] █│ │
│ USB SS Physical Connector #1 [Enabled] █│ │
│ USB SS Physical Connector #2 [Enabled] █│ │
│ USB SS Physical Connector #3 [Enabled] █│ │
│ USB SS Physical Connector #4 [Enabled] █│ │
│ USB SS Physiacl Connector #0 [Enabled] █│ │
│ USB HS Physical Connector #1 [Enabled] █│ │
│ USB HS Physical Connector #2 [Enabled] █│────────────────────────────────│
│ USB HS Physical Connector #3 [Enabled] █│→←: Select Screen │
│ USB HS Physical Connector #4 [Enabled] █│↑↓: Select Item │
│ USB HS Physical Connector #5 [Enabled] █│Enter: Select │
│ USB HS Physical Connector #6 [Enabled] █│+/-: Change Opt. │
│ USB HS Physical Connector #7 [Enabled] █│F1: General Help │
│ USB HS Physical Connector #8 [Enabled] █│F2: Previous Values │
│ USB HS Physical Connector #9 [Enabled] █│F3: Optimized Defaults │
│ USB HS Physical Connector #10 [Enabled] █│F4: Save & Exit │
│ USB HS Physical Connector #11 [Enabled] █│ESC: Exit │
│ USB HS Physical Connector #12 [Enabled] █│ │
│ USB HS Physical Connector #13 [Enabled] █│ │
│ ░│ │
│ ▼│ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
 XHCI Disable Compliance Mode
Options: FALSE / TRUE
 xDCI Support
Options: Disabled / Enabled
 USB Port Disable Override
Options: Disabled / Select Per-Pin
 USB SS Physical Connector #x
Options: Disabled / Disabled
 USB HS Physical Connector #x
Options: Disabled / Disabled
 USB Precondition
Options: Disabled / Enabled