Beckhoff CB3064 Series - Page 99

Chipset Chapter: BIOS Settings
Beckhoff New Automation Technology CB3064-xxxx page 99
6.4.2.4.2 Serial IO UART1 Settings
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Chipset
┌─────────────────────────────────────────────────────────────────┬────────────────────────────────┐
│ Serial IO UART1 Settings │When enabled configures │
│ GNSS moved 2 menu levels up │additional 2 GPIO pads for use │
│ Hardware Flow Control [Enabled] │as RTS/CTS signals for UART │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │ │
│ │────────────────────────────────│
│ │→←: Select Screen │
│ │↑↓: Select Item │
│ │Enter: Select │
│ │+/-: Change Opt. │
│ │F1: General Help │
│ │F2: Previous Values │
│ │F3: Optimized Defaults │
│ │F4: Save & Exit │
│ │ESC: Exit │
│ │ │
│ │ │
│ │ │
│ │ │
└─────────────────────────────────────────────────────────────────┴────────────────────────────────┘
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
 Hardware Flow Control
Options: Disabled / Enabled