Commissioning
CP27xx32 Version: 2.0
UPS software components
To operate the power supply unit as a UPS, the UPS driver software with corresponding drivers must be
installed on the Panel PC. The software and drivers are already installed on delivery of the PC with operating
system. Otherwise, you will have to install them yourself. In this case, contact Beckhoff Service, who will
provide you with software and drivers. The driver software comes with a detailed help function. Call up the
help files either directly from the configuration register by clicking the Help button or start the file under Start
> Programs > Beckhoff > UPS software components.
The communication between your PC and the UPS takes place via the BIOS API. In addition to the UPS
driver, you also need the Beckhoff Automation Device Driver.
To Next Page
Loading...
