Beckhoff CP2712 - Technical Data; Table 16 Technical Data

Technical data
CP27xx 47Version: 2.0
9 Technical data
Table16: Technical data
Product designation CP27xx
Weights aluminum front/stainless
steel front
CP2712: 3.8kg / 4.1kg
CP2713: 3.6kg / 3.9kg
CP2715: 4.6kg / 4.9kg
CP2716: kg
CP2718: 6.0kg / 6.3kg
CP2719: 6.6kg / 6.9kg
CP2721: kg
CP2724: 7.9kg / 8.2kg
Supply voltage 20.4-30 V
DC
(24 V
DC
power supply unit, NEC class 2)
Maximum power consumption with
basic configuration
1)
CP2712: approx. 41W
CP2713: approx. 36W
CP2715: approx. 45W
CP2716: approx. 38W
CP2718: approx. 50W
CP2719: approx. 50W
CP2721: approx. 52W
CP2724: approx. 59W
Protection rating Front IP65, rear IP20
Vibration resistance (sinusoidal
vibration)
EN 60068-2-6: 10 ... 58 Hz: 0.035mm
58 ... 500 Hz: 0.5 G (~ 5 m/ s
2
)
Shock resistance (shock) EN 60068-2-27: 5 G (~ 50 m/ s
2
), duration: 30 ms
EMC interference immunity conforms to EN 61000-6-2
EMC interference emission conforms to EN 61000-6-4
Permissible ambient temperature Operation: 0°C to +55°C
Transport/storage: -25°C to +65°C
Permissible relative air humidity Maximum 95%, no condensation
Transport and storage The same values for air humidity and shock resistance are to be
observed during transport and storage as in operation. The shock
resistance during transport can be improved by means of suitably
packing the panel PC.
1)
The power consumption of your device beyond the basic configuration can be found in the data sheet
Power loss and power consumption. There you will find information on how the power consumption of your
device changes according to the selected equipment, accessories and connected devices.