2-2
2.3 Installation:
Improper installation of the AC drive will greatly reduce its life. Be sure to observe the
following precautions when selecting a mounting location. Failure to observe these
precautions may void the warranty!
Do not mount the AC drive near heat-radiating elements or in direct sunlight.
Do not install the AC drive in a place subjected to high temperature, high humidity,
excessive vibration, corrosive gases or liquids, or airborne dust or metallic particles.
Mount the AC drive vertically and do not restrict the air flow to the heat sink fins.
The AC drive generates heat. Allow sufficient space around the unit for heat dissipation as
shown in the figure below:
150mm
150mm
50mm
50mm
Air Flow
B550 Series sensorless vector frequency drive
To Next Page
Loading...
