BEIER-Electronic SFR-1 - Sounds

GB Sound speed controller SFR-1
06.02.2019 BEIER-Electronic 19
Sounds
All sounds are stored in the SFR-1 with our software SFR-1 Sound-Teacher, in so
called „slots".
You don’t have to use every slot. If you don’t want e.g. any starting-noise, just keep
the starting-noise slot free.
In both slots for “Idling noise“and “FG1“ (engine sound) you should place a sound,
otherwise no sound in standing and driving is played.
Here an overview, which sounds in which slots, can be stored:
Sound-Slots
Engine start sound coldstart / warmstart
Idle sound
Vehicle start sound (idling  drive)
Vehicle stop sound (drive  idling)
Engine stop sound
Engine sound FG1 - 5 (different types: slow down, normal and speed up)
Shift sounds between FG1 - FG5
Reverse engine sound
Brake sound
Cornering squeak
Indicator noise
Turn warning left / right
Engine sound 2: Engine start/stop sound, idle sound, vehicle start/stop, engine
sound
Additional sounds 1 - 30
Sound from Servo 1 - 4 left/right
Sound from IR-Servo 1 - 2 left/right
Undervoltage sound
Overcurrent sound
Random sound 1 - 8
Tracks 1-30 for WAV-Player
Optionally, the engine sound for driving backward can be different from the sound
driving forward. You can put sounds in these slots, but you don’t have to. If the slot for
driving backward is empty, the sound module will play the normal engine sound. Using
slots for driving backward sounds only make sense if the sounds differ from driving
forwards.