GB Sound speed controller SFR-1
4 BEIER-Electronic 06.02.2019
Introduction
The SFR-1 is a multifunctional module and combines the functions of the sound
module USM-RC-2 and the speed controller UFR-1230. It comes with a large light
control unit, three servo outputs and an infrared port for the light module SM-IR-16-2,
to forward light signals to a trailer.
The SFR-1 is suitable for all types of RC standard transmitter. With the various
setting options the SFR-1 can be easily adjusted to nearly all model requirements
and driving behaviours. For an easy start we have more than 170 ready to use sound
projects and 700 sound files for various types of models. Of course, own recordings
can be used, as well.
Sound functions:
For an authentic sound of the model, sounds can be selected for following areas:
• Driving and engine sounds (speed-dependent)
• Additional sounds (e.g. horns, hydraulic and compressed air noises)
• Random sounds (e.g. squeaking, animal and ambient sounds)
Driving functions:
Brushed and bell-armature motors (DC) can be controlled smooth and realistic with
the SFR-1. An ideal driving behavior can be achieved through a variety of settings.
The speed controller on the SFR-1 has following characteristics:
• Cruise control functions
• Different brake functions (with hand- and emergency brake)
• Adjustable load regulation
• Adjustable mass inertia
• Steering inertia (with adjustable steering ankle limits)
• Adjustment of throttle curve for different driving behaviours
Light functions:
To realize different light effects, the SFR-1 has 16 switching outputs to connect
LEDs, lamps and other consumers. Light functions, such as low beam, rear light,
brake light, indicator lights, warning lights, flickering lights, etc. can be easily
implemented and controlled.
All light functions can be activated or deactivated automatically with sounds and
movements.
Servo movements:
With two additional servo outputs, movements can be synchronised to the played
sound.
To Next Page
Loading...
