GB Sound speed controller SFR-1
06.02.2019 BEIER-Electronic 89
Sound simulation
The sound simulation can be started with a click on
“Sound simulation” in the menue “Help”.
You can play-back the driving sounds and the
additional sounds 1 to 30 of your current project at
your pc. This is an easy way to check your sounds
and configurations without copying all files to SD
card.
The driving sound can be switched on and off and
even the driving speed can be simulated by the slider.
To trigger an additional sound, just click on the
corresponding button. The additional sounds can also
be triggerd by the keyboard:
• Button F1 - F10 Additional sound 1 - 10
• Button 1 - 0 Additional sound 11 - 20
Testing functions with help of data cable K-USB-2
The function “Control SFR-1 functions with data cable” can be found under menu
“Data cable”. With the help of the data cable K-USB-2, all functions can be controlled
directly from the PC and not only via the remote control. This can be very helpful for
tests without transmitter.
As usual, the functions can be selected with drop boxes. It is possible to activate the
functions static or in memory at the SFR-1.
Warning: As long as the diagnosis window is open, the "normal" function triggering
(eg. prop. channels, nautic, switching inputs) are deactivated!
To Next Page
Loading...