BEIER-Electronic SFR-1 - Page 27

GB Sound speed controller SFR-1
06.02.2019 BEIER-Electronic 27
Loop / immed. stop
When the sound is started, it is played again and again
from start to finish in an endless loop. To switch the
sound off it must be virtually “started” again. The sound
then stops immediately.
Triggering with proportional channels #2 - #4 (as static configured), nautic-
mode or switching-inputs:
Mode
Function
Once / complete
When the sound is started, it is played exactly once,
from start to finish, and then it stops. It is not possible to
halt the sound prematurely; it is always played
completely.
Once / immed. stop
When the sound is started, it is played exactly once,
from start to finish, and then stops. However, if the input
is switched off while it is still running, the sound is then
stopped immediately.
Loop / complete
When the input is switched on, the sound is played
again and again from start to finish in an endless loop. If
the input is switched off again, the sound runs from start
to finish once more completely, and then stops.
Loop / immed. stop
When the input is switched on, the sound is played
again and again from start to finish in an endless loop. If
the input is switched off again, the sound then stops
immediately.