GB Sound speed controller SFR-1
74 BEIER-Electronic 06.02.2019
Configuration - Outputs -Sequences
With the SFR-1 up to 16 outputs can be combined and activated in a defined
sequence (duration and intensity). This can be parallel or in a row. In total 8 output
sequences can be programmed, each with 36 steps.
The sequence is always executed with priority to other output functions. All other
outputs are deactivated as long as the output sequence is running.
On the right side the outputs that should be used for the sequence can be selected
and they appear automatically in the step-table.
Total steps
For each sequence, the number of steps can be set here. In each case, up to 36
steps are possible.
If you activate the sequence, the steps will start with step 1 and run sequentially.
To Next Page
Loading...
