1-7
3 Security
The topic of this chapter is the security exclusively. Please see chapter 1 for
the general security advice and warning hints and the security and warning
hints in the other chapters of this operating manual.
3.1 Available security systems
Danger
Check all security systems daily for functioning and effectivity!
Danger
Changes to the machine may influence function and effectivity of the security
systems negatively!
A Program stop button
B Mains / emergency stop button
3.1.1 Program stop button
The program stop button is mounted in the right upper corner of the operation
device. After pressing, all movements and the sewing process will be
stopped immediately.
Before a re-start the program stop button must be turned to the right to be
unlocked. With the release, the reset will be triggered.
To Next Page
Loading...
