Installation BRS20/22/30/32/40/42/50/52
Release
12
01/2022
19
CE marking
The labeled devices comply with the regulations contained in the following
European directive(s):
2011/65/EU and 2015/863/EU (RoHS)
Directive of the European Parliament and of the Council on the
restriction of the use of certain hazardous substances in electrical and
electronic equipment.
2014/30/EU (EMC)
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to
electromagnetic compatibility.
2014/34/EU (ATEX)
Directive of the European Parliament and the council on the
harmonisation of the laws of the Member States relating to equipment
and protective systems intended for use in potentially explosive
atmospheres.
The ATEX Directive applies exclusively to the device variants labeled
with an ATEX certificate number:
See “ATEX directive 2014/34/EU – specific regulations for safe
operation” on page 16.
In accordance with the above-named EU directive(s), the EU conformity
declaration will be available to the relevant authorities at the following
address:
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
You find the EU conformity declaration as PDF file for downloading on the
Internet at: https://www.doc.hirschmann.com/certificates.html
The device can be used in industrial environments.
Interference immunity: EN 61000-6-2
Emitted interference: EN 55032
You find more information on technical standards here:
“Technical data” on page 65
The assembly guidelines provided in these instructions must be strictly
adhered to in order to observe the EMC threshold values.
To Next Page
Loading...
