20
Installation BRS20/22/30/32/40/42/50/52
Release
12
01/2022
Warning! This is a class A device. This device can cause interference in
living areas, and in this case the operator may be required to take
appropriate measures.
UKCA marking
The labeled devices comply with the following UK regulations:
S.I. 2012 No. 3032
Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronical Equipment Regulations
S.I. 2016 No. 1091
Electromagnetic Compatibility Regulations 2016
S.I. 2016 No. 1107
Equipment and Protective Systems Intended for use in Potentially
Explosive Atmospheres Regulations 2016
Note:The regulation applies exclusively to the device variants labeled
with a UKEX certificate number: See “UK regulation S.I. 2016:1107
(as amended by S.I. 2019:696) - Schedule 3A, Part 6” on page 17.
The UKCA conformity declaration will be available to the relevant
authorities at the following address:
Belden UK Ltd.
1 The Technology Centre, Station Road
Framlingham, IP13 9EZ, United Kingdom
You find the UKCA conformity declaration as PDF file for downloading on
the Internet at: https://www.doc.hirschmann.com/certificates.html
To Next Page
Loading...
