5. Gently rinse the fuel screen reservoir and all the
components.
6. Fill the reservoir with clean fuel.
7. Assemble the fuel screen, sealing ring and
spring to the reservoir.
8. Install the fuel screen assembly securely.
9. Operate the hand priming pump to ensure that
the reservoir is full.
Change the Fuel Filters
Change the Primary Fuel Filter
1. Fit a hose clamp on the fuel hose between the
fuel tank and the primary fuel filter to stop fuel
flow.
2. Unscrew and remove the primary fuel filter (1)
from the filter head (2).
3. Discard the fuel filter, do not re-use.
4. Clean the filter head with a lint-free cloth.
5.
Fill a new primary fuel filter with fuel, smear a lit-
tle oil on the seal (1) and secure in place.
6. Remove the hose clamp from the fuel hose.
7. Bleed the fuel system.
8. Start the engine and check for leaks at the fuel
filter head.
Change the Secondary Fuel Filters
1. Unscrew and remove both filter housing bolts (1)
and remove the secondary fuel filters (2) from
the filter head (3).
870984-01 77
June 1, 1999
F000989
1
2
F
1
F000408
To Next Page
Loading...
Need help?
General
