Bell B40C 6X6 User Manual

SAFETY DECALS
There are several safety decals on your BELL EQUIPMENT machine. Their exact location and description of
the hazard are reviewed in this section. Please take the time to familiarise yourself with these safety decals.
Keep the decals clean by using a soft cloth, water, and soap. Do not use solvent, gasoline, etc. You must replace
a decal if it is damaged, missing or cannot be read. If a decal is on a part that is replaced, ensure a new decal is
installed on the replacement part. Contact your BELL EQUIPMENT Representative for new decals.
Located on the side window and on both sides of the
mudguard and inside the cab
870984-01 iv
June 1, 1999
204607
WARNING
SPRING UNDER
PRESSURE
READ MAINTENANCE
MANUAL BEFORE
CARRYING OUT
MAINTENANCE
IN THIS AREA
Located on the park brake actuator.
WARNING
204615
COMPRESSED AIR
RESERVOIR
DRAIN COMPLETELY
BEFORE CARRYING
OUT MAINTENANCE
Located on the pressurised components.
WARNING
204618
MACHINE OPERATOR
HAS LIMITED VISIBILITY
DO NOT REMAIN IN THIS
AREA WHILE MACHINE
IS RUNNING
Located on the rear of the machine.
WARNING
204617
INSTALL CAB
SUPPORT POLE
BEFORE CARRYING
OUT ANY
MAINTENANCE
IN THIS AREA
Located on the left mudguard next to the cab lift
pump.
WARNING
204616
INSTALL BIN
SUPPORT POLE
BEFORE CARRYING
OUT ANY
MAINTENANCE
IN THIS AREA
Located on both sides of the rear chassis.
WARNING
204619
PRESSURISED GAS
REFER TO OPERATORS
MANUAL FOR CORRECT
DISASSEMBLY
PROCEDURE
Located on the suspension cylinders.
WARNING
204620
INSTALL
ARTICULATION
LOCK BEFORE
CARRYING OUT
ANY MAINTENANCE
IN THIS AREA
Located on each side of the articulation assembly.
WARNING
204606
DO NOT OPERATE OR WORK
ON THIS MACHINE UNLESS
YOU HAVE READ AND
UNDERSTOOD THE
INSTRUCTIONS AND WARNINGS
IN THE OPERATORS MANUAL
FAILURE TO FOLLOW THE
INSTRUCTIONS OR HEED THE
WARNINGS COULD RESULT IN
PERSONAL INJURY OR DEATH

Bell B40C 6X6 Specifications

General

Brand	Bell
Model	B40C 6X6
Category	Trucks
Language	English