EasyManuals Logo

Bell B40C 6X6 User Manual

Bell B40C 6X6
155 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
CHAPTER 9. DAILY OR 10 HOURLY SERVICE CHECKS
Introduction
It is recommended that the daily or 10 hourly service
checks be performed by qualified service personnel.
Depending upon the working conditions, it may not
be necessary to carry out some of the tasks listed in
this chapter on a daily basis.
Service Instructions
Ensure that the machine is in the service position.
Refer to Pre-service Instructions, Chapter 7.
Engine
Note: For further engine information or details not
shown in this manual, refer to the ADE Engine Man-
ual.
Check the Oil Level
1. Lift the dipstick clip.
2. Remove the dipstick (1).
3. Wipe the dipstick clean.
4. Re-insert the dipstick, ensuring that it is properly
seated.
5. Remove the dipstick.
6. Check that the oil level reaches the upper mark
(1) on the dipstick.
7. Re-insert the dipstick, ensuring that it is properly
seated and fasten the dipstick clip.
8. If necessary, replenish the engine oil. Refer to
Fill the Engine with Oil, Chapter 10.
Drain the Primary Fuel Filter
1. Loosen the wing nut (1) on the primary fuel filter.
2. Drain the accumulated water into a container.
3. Tighten the wing nut when fuel flows out water
free.
870984-01 59
June 1, 1999
1
F000107
1
2
F000396
1
f000285

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bell B40C 6X6 and is the answer not in the manual?

Bell B40C 6X6 Specifications

General IconGeneral
BrandBell
ModelB40C 6X6
CategoryTrucks
LanguageEnglish

Related product manuals