Clean and Change the Air Conditioner
Internal Filter
1. Unclip the air conditioner internal filter and re-
move it from the bottom of the air conditioner.
2. Clean the filter element using compressed air
blown from the inside to the outside of the filter
element.
3. Inspect the filter element for any damage or
tears.
Note: If there is any damage or tears, then the filter
element must be changed.
4. Refit the internal filter onto the bottom of the air
conditioner and re-clip securely into place.
The air conditioner unit requires specialised servic-
ing annually. Contact
BELL EQUIPMENT
Product
Support.
870984-01 87
June 1, 1999
F000410