Designation B.Body Evo (full-body applicator) B.Bed Evo (full-body applicator) B.Pad Evo (local applicator)
Article number 434300 434400 434100
Dimensions L x W x D in cm 152 x 59 x 3 190 x 90 x 1 133 x 15 x 0.8
Weight in kg 1.9 1.97 0.33
Number of copper coils 16 16 4
Average flux density ≈ 35 μT (max. level) ≈ 35 μT (max. level) ≈ 100 μT (max. level)
Average flux density plus ≈ 50 μT (max. level) ≈ 50 μT (max. level) ≈ 150 μT (max. level)
Number of external connections 1 x magnetic connector with flexible cable
with PVC insulation
1 x magnetic connector with flexible cable
with PVC insulation
1 x magnetic connector with flexible cable
with PVC insulation
Composition of the
surface material in contact with the body
100% PES 100% PES 100% PES
Cable length 250 cm 250 cm 250 cm
Protection against moisture IP22 IP22 IP22
Device class Applied part, type BF Applied part, type BF Applied part, type BF
Location of type plate Rear of applicator Rear of applicator Rear of applicator
Designation B.Spot Evo (local applicator module) B.Sit Evo (local applicator) B.Grip Evo (holder module)
Article number 434000 434200 454000
Dimensions L x W x D in cm 12.12 x 12.12 x 2.46 44 x 36.7 x 5 12 x 12 x 4.8
Weight in kg 0.185 1.88 0.213
Number of copper coils 1 1 -
Average flux density ≈ 100 μT (max. level) ≈ 100 μT (max. level) -
Average flux density plus ≈ 150 μT (max. level) ≈ 150 μT (max. level) -
Number of external connections Rotation-free 5-pole tracks
1 x magnetic connector with flexible cable
with PVC insulation Rotation-free 5-pole tracks
Material composition (surface) 100% PC
Surface material in contact with the body
66% PES | 12% Rayon | 2% Spandex
20% TPU film PC/ABS
Cable length Cable on B.Grip Evo 250 cm 250 cm
Protection against moisture IP22 IP22 IP22
Device class Applied part, type BF Applied part, type BF -
Location of type plate Rear of applicator module Rear of applicator Inside of holder module
FR EN
2726
To Next Page
Loading...
