Designation
B.Light Clear Evo
(light applicator module)
B.Light Restore Evo
(light applicator module) B.Box Evo Battery Stand
Article number 434500 434600 454100
Dimensions L x W x D in cm 12.12 x 12.12 x 2.46 12.12 x 12.12 x 2.46 18.3 x 10.8 x 9.8
Weight in kg 0.12 0.12 0.498
Supply voltage - - 7.2 VDC
Wavelength range 465 nm and 645 nm (±20 nm) 645 nm and 860 nm (±20 nm) -
Number of LEDs 100 100 -
Maximum radiation intensity (mW/cm²)
at the skin surface
465 nm: ≈ 0.8
645 mm: ≈ 1.2
645 nm: ≈ 0.56
860 mm: ≈ 1.4 -
Treatment area
(J/cm
2
) on the skin during
a 480 sec. treatment
(J/cm
2
) on the skin during
a 480 sec. treatment -
Treatment dose (J/cm²) at the
skin surface per 480 sec. treatment ≈ 1 ≈ 1 -
Material composition (surface) 100% PC 100% PC 80 % Al, 20% PC/ABS
Protection against moisture IP22 IP22 IP22
Risk group 1 0 -
Device class Applied part, type BF Applied part, type BF -
Battery type - - Li-Ion
Battery capacity - - 48 Wh
Number of treatments - - ≈50 @ 8 minutes each
Number of external connections - - 5-pin connector
Location of type plate Rear of applicator module Rear of applicator module Underside of B.Box Evo Battery Stand
FR EN
2928
To Next Page
Loading...
