Safety instructions
10
EDS309x_D00012_03_M_XXEN/11.2014
2.3 General safety instructions
Along with this operating manual, the enclosed "Important safety instructions for Bender products"
form part of the documentation for this device.
2.4 Qualified personnel
Only a qualified electrician is allowed to use the EDS3090 devices. The electrician should be familiar
with the assembly, commissioning and operation of the equipment and have undergone appropri-
ate training. The person using the EDS system must have read this manual and understood all the
instructions relating to safety.
To Next Page
Loading...
Need help?
General
