Connecting the locating current injector
28
EDS309x_D00012_03_M_XXEN/11.2014
5.3 Connection to a live IT system
Connect the locating current injector PGH18… as follows:
Risk of electric shock!
On touching live uninsulated conductors, death or serious injury may be caused.
For this reason prevent any physical contact with active conductors and follow
the rules for working on electrical systems.
Risk of electric shock!
If the PGH18… is connected using terminals L1, L2, L3 (or L1, L2) to a system that
is live due to its operation, the terminal must not be disconnected from the
protective earth conductor (PE). Otherwise the terminal will be at the dangerous
system voltage!
I
L
F
EDS195P
ISOSCAN®
I
L
I
n
ALARM
I n
I
L
INFO
MENU
HOLD
RESET
ESC
OK