Connecting the locating current injector
30
EDS309x_D00012_03_M_XXEN/11.2014
For insulation fault location within the junction box, it is essential that the ± cables of a string are ar-
ranged in a way that the measuring clamp PSA30… can be put around the cables.
Insulation faults in the strings can be localised by means of two measuring clamps connected in par-
allel and an EDS-SET. For this purpose, place the measuring clamps on both sides of the module sup-
ply conductors in the direction indicated by the arrows.
To Next Page
Loading...
