Bender RCMA423-DM - Page 42

Technical data
42
RCMA423-DM_D00064_03_M_XXEN/06.2017
Connection
For UL applications: Copper lines ........................................................................................................ at least 60/70 °C
Connection type.......................................................................................................... screw-type terminals
Connection properties:
Rigid/flexible............................................................................................... 0.2…4/0.2…2.5 mm
2
(AWG 24…12)
Multi-conductor connection (2 conductors with the same cross section):
Rigid/flexible........................................................................................................................ 0.2…1.5/0.2…1.5 mm
2
Stripping length............................................................................................................................................. 8…9 mm
Tightening torque..................................................................................................................................... 0.5…0.6 Nm
Connection type............................................................................................................ push-wire terminals
Connection properties:
Rigid............................................................................................................................ 0.2…2.5 mm
2
(AWG 24…14)
Flexible without ferrules............................................................................................ 0.2…2.5 mm
2
(AWG 24…14)
Flexible with ferrules.................................................................................................. 0.2…1.5 mm
2
(AWG 24…16)
Stripping length................................................................................................................................................... 10 mm
Opening force........................................................................................................................................................... 50 N
Test opening, diameter....................................................................................................................................... 2.1 mm
Other
Operating mode ........................................................................................................................... continuous operation
Mounting .............................................................................................................................................. display oriented
Degree of protection, built-in components (DIN EN 60529).................................................................................. IP30
Degree of protection, terminals (IEC 60529) .......................................................................................................... IP20
Enclosure material ....................................................................................................................................polycarbonate
Flammability class .......................................................................................................................................... UL 94 V-0
DIN rail mounting............................................................................................................................................ IEC 60715
Screw fixing ......................................................................................................................... 2 x M4 with mounting clip
Software version .......................................................................................................................................... D330 V1.0x
Weight................................................................................................................................................................ ≤ 160 g
( )* = factory setting