Bender RCMB300 Series - Page 46

Modbus register
46
RCMB300-series_D00372_01_M_XXEN/06.2019
Tab. 7.5: Control commands
1)
Test alarm: Output a test alarm on a measuring channel. The test alarm refers only to bus
messages. No relays switch. The test alarm is deactivated after 1 minute
(= 0).
20009 RW UINT16 Start offset measurement
Read
1 = offset measurement inactive/completed
2 = offset measurement running
Write
2 = start offset measurement
(secured via reg. 12005)
1
20010 RW UINT16
Test alarm
1)
0 = no test alarm
1 = test alarm channel 1
2 = test alarm channel 2
3 = test alarm channel 3
4 = test alarm channel 4
0
20011…23999 Reserved
Register Property Format Description
Comment
Unit
Value
Factory
setting