Bender VME420 - Page 46

Technical data VME420…
46
VME420_D00026_03_M_XXDE/04.2019
Connection
Connection .................................................................................................................. screw-type terminals
Connection properties:
rigid/ flexible ............................................................................................. 0.2…4 / 0.2…2.5 mm
2
/ AWG 24…12
Multi-conductor connection (2 conductors with the same cross section):
rigid/ flexible ............................................................................................................ 0.2…1.5 mm
2
/ 0.2…1.5 mm
2
Stripping length ............................................................................................................................................ 8…9 mm
Tightening torque.................................................................................................................................... 0.5…0.6 Nm
Connection type............................................................................................................ push-wire terminals
Connection properties:
rigid ........................................................................................................................... 0.2…2.5 mm
2
( AWG 24…14)
Flexible without ferrules......................................................................................... 0.75…2.5 mm
2
( AWG 19…14)
Flexible with ferrules................................................................................................. 0.2…1.5 mm
2
( AWG 24…16)
Stripping length .................................................................................................................................................. 10 mm
Opening force........................................................................................................................................................... 50 N
Test opening, diameter....................................................................................................................................... 2.1 mm
Other
Operating mode ........................................................................................................................... continuous operation
Position ........................................................................................................................................................ any position
Degree of protection DIN EN 60529, internal components ..................................................................................... IP30
Degree of protection DIN EN 60529, terminals........................................................................................................ IP20
Enclosure material ....................................................................................................................................polycarbonate
Flammability class ........................................................................................................................................... UL94 V-0
DIN rail mounting acc. to.................................................................................................................................IEC 60715
Screw mounting................................................................................................................... 2 x M4 with mounting clip
Software version .......................................................................................................................................... D235 V2.3x
Weight................................................................................................................................................................. ≤150 g
( )* = factory setting
** = The technical data applies to the operating range of the rated frequency (15…460 Hz) only.