GrandPrix (GP-7 Series) Two-Post Lifts 18 P/N 5900209 — August 2018 — Rev. C2
Installing the Post Straps
You may want to install the Post Straps on the posts prior to standing them up. It is not required, but if
you install them after standing up the posts, you will need a ladder to reach them.
Important: If you have not already decided which post will be your Powerside Post and which will
be your Offside Post, installing the Post Straps settles the matter: the Post Strap with
the welded plate is the Powerside Post. The other post is the Offside Post.
To install the Post Straps:
1. Bolt the Post Strap
with the welded plate
to the Powerside Post.
2. Bolt the other Post Strap (no welded plate) to the Offside Post.
To Next Page
Loading...
