HD-973P Series Multi-Level Parking Lift 4 P/N 5900076 — Rev. B3 — January 2024
Table of Contents
Introduction 4 Operation 73
Shipping Information 5 Maintenance 78
Safety Considerations 5 Troubleshooting 81
Components 8 Wiring Diagrams 82
Specifications 10 Labels 84
FAQ 13 Parts Drawings 87
Installation Checklist 14 Maintenance Log 109
Installation 15
Introduction
This manual describes the following BendPak Parking Lift:
• HD-973P: Multi-Level Parking Lift that can raise Vehicles up to 7,000 lbs. (3,175 kg) on the Upper
Platform and up to 9,000 lbs. (4,082 kg) on the Lower Platform.
• HD-973PX: A taller version of the HD-973P with higher rise and extended Runways.
This manual is mandatory reading for all users of the HD-973P series, including anyone who installs,
uses, maintains, repairs, or wants to know more about them.
⚠ DANGER Use care when installing, operating, maintaining, or repairing this equipment; failure
to do so could result in property damage, product damage, injury, or (in very rare
cases) death. Make sure only authorized personnel operate this equipment. An
authorized technician must perform all repairs. Do not make modifications to the
unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions in this manual and on the
labels on the unit.
This manual is mandatory reading for all users of HD-973 Series Parking Lifts, including anyone
who installs, operates, maintains, or repairs them.
Always keep this manual on or near
the equipment.
Technical support and service is available from your dealer, on the Web at
bendpak.com/support, by email at support@bendpak.com, or by phone at
(800) 253-2363, option 7 then 4.
Online chat is also available at www.bendpak.com click the chat icon.
Scan this QR Code for up-to-date information and videos on the Parking Lift series.
To Next Page
Loading...
