BendPak MD-6XP - User Manual

1645 Lemonwood Dr.
Santa Paula, CA, 93060 USA
Toll Free: (800) 253-2363
Telephone: (805) 933-9970
bendpak.com
Portable Mid-Rise Scissor Lift
Installation and Operation Manual
Manual P/N 5900108 — Manual Revision F — March 2020
Models:
• MD-6XP
Designed and engineered by BendPak Inc. in Southern California, USA. Made in China.
⚠
DANGER
Read the entire contents of this manual before using this
product. Failure to follow the instructions and safety precautions in
this manual can result in serious injury or death. Make sure all other
operators also read this manual. Keep the manual near the product
for future reference. By proceeding with setup and operation,
you agree that you fully understand the contents of this
manual and assume full responsibility for product use
.

Summary

Shipping and Safety Information

Safety Considerations

General safety guidelines for operating the lift, including PPE.

Frequently Asked Questions

Components and Specifications

Installation Checklist

Installation Process

Installation Safety and Tools

Critical safety rules and necessary tools for lift installation.

Site Selection and Preparation

Guidelines for choosing a site, electrical needs, clearance, and initial setup.

Hydraulic System Setup

Lift Arm and Power Unit Installation

Testing and Operation Readiness

Operation Procedures

Operational Safety Checks

Essential safety checks and procedures before raising a vehicle.

Raising and Lowering Vehicles

Step-by-step instructions for safely raising and lowering vehicles.

Maintenance and Troubleshooting

Technical Information

BendPak MD-6XP Specifications

General

Brand	BendPak
Model	MD-6XP
Category	Lifting Systems
Language	English