19
How to assemble your monitor hardware (for
models with height adjustment stand)
• If the computer is turned on you must turn it off before continuing.
• Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The illustrations in this document are for your reference only and may look different from the appearance
of the product.
• Avoid finger pressure on the screen surface.
• The latch on the monitor stand/base of the same model may vary by design, yet the installation, function,
and product appearance are not affected in general. Be sure to assemble the monitor with the stand/base
in the same package.
Never stand your monitor on a desk or floor without its stand arm and base. The controls on the bottom of
the front bezel are not designed to hold the weight of the monitor and may be damaged.
1. Attach the monitor stand and base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
the monitor packaging bag on the desk for
padding.
Gently lay the screen face down on a flat clean
padded surface.
To Next Page
Loading...
Need help?
General
