24
How to detach the stand and the base
1. Prepare the monitor and area.
Turn off the monitor and the power before
unplugging the power cable. Turn off the computer
before unplugging the monitor signal cable.
Gently lift the display up and extend the stand to
the maximum extended position.
Protect the monitor and screen by clearing a flat
open area on your desk and placing a soft item like
a towel on the desk for padding, before laying the
screen face down on a flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage
the monitor surround and controls.
2. Remove the monitor stand.
While pressing and holding the quick release
button ( ), detach the stand from the monitor
( and ).
3. Remove the monitor base.
Release the thumbscrew on the bottom of the
monitor base. And then detach the base from the
stand.
To Next Page
Loading...
Need help?
General
