26
Rotating the monitor
1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Right-click the desktop and select
Screen resolution from the popup menu. Select Portrait in
Orientation, and apply the setting.
Depending on the operation system on your PC, different procedures should be followed to adjust the
screen orientation. Refer to the help document of your operation system for details.
2. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the
maximum extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to
rotate from landscape to portrait mode.
3. Rotate the monitor 90 degrees
clockwise as illustrated.
To avoid the edge of the LCD display hitting the monitor
base surface while it is being rotated, do tilt and extend
the monitor to the highest position before you start to
rotate the display.
You should also make sure there are no obstacles
around the monitor and there is enough room for
cables. You might need to route the cables again via the
cable clip after the rotation.
90
To Next Page
Loading...
Need help?
General
