BenQ BL2790QT User Manual

31
2. Connect the PC video cable
The video cables included in your package and the socket illustrations on the right may vary depending
on the product supplied for your region.
• Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of
the cable to the HDMI port of a digital output device.
• Connect the plug of the DP cable to the monitor video socket. Connect the other end of the
cable to the computer video socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
3. Connect the headphone.
You may connect headphones to the headphone
jack found below the rear of the monitor.
4. Connect the power cable to the
monitor.
Plug one end of the power cord into the socket
labelled on the rear of the monitor. Do not
connect the other end to a power outlet just yet.
or or

BenQ BL2790QT Specifications

General

Brand	BenQ
Model	BL2790QT
Category	Monitor
Language	English