28 Playback mode
English
You cannot trim images in the size of 3:2, 16:9, or VGA.
Resizing
Changes an image file to a smaller size, and overwrites the image file or saves it as another
new file.
To resize an image:
1. Press > or to move to the image you want to resize.
2. Press > > Resize > or .
3. Press or to select the target image size to which you want to reduce.
4. Press to confirm the change and save the image file.
Startup image
Sets the welcome screen when the camera is powering on.
To select a startup image:
1. Press > > Startup Image > or .
• To use the default startup image, select Default.
• To use a custom image, select My Photos and press or to select an image.
• To disable the startup image, select Off.
2. Press .
DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the memory
card for printing and specify the number of print copies in advance using the camera. This
is extremely convenient for sending the images to a photo developing service or for printing
on a direct print function compatible printer.
To set up DPOF:
1. Press > > DPOF.
2. Press or and select one of the following options.
• To set the DPOF setting for one image in a time, select One. and press or to
select an image.
• To set the DPOF setting for all images in a time, select All.
• To clear all DPOF settings to initial default, select Reset.
3. Press or to specify the number of copies.
4. Press to decide whether you want to turn the date stamp on.
5. Press .
C1250_C1255_UM - EN.book Page 28 Friday, March 26, 2010 1:33 PM
To Next Page
Loading...
Need help?
General
