BenQ M31 - File Number (Default: Serial); Date;Time; Format; Default Setting

63
6.5.2 File Number (Default: Serial)
The file number can be set in this function.
1. Turn [On] the Digital Video Camera and switch to [Setting]
mode.
2. Press [4-way Direction] Button to select the [File Number] item.
Press OK Button or touch the screen to display submenu.
3. Press [4-way Direction] Button to choose [Reset]/ [Serial], then
press OK Button or touch the panel to confirm.
Notes:
1. The file number will start from 0001 when setting to [Reset].
2. When setting to [Serial], the stored files will be in serial numbers.
6.5.3 Date/Time
Please refer to the chapter 2.7.1 “Setting Date/Time.”
6.5.4 Format
Use this function to format the memory card/ built-in memory.
1. Turn [On] the Digital Video Camera and switch to [Setting]
mode.
2. Use [4-way Direction] Button to select the [Format] item. Press
OK Button or touch the screen to display submenu.
3. Press [4-way Direction] Button to select [V] or [X] to confirm; or
touch the screen to click the item.
6.5.5 Default Setting
Use this function to reset from all settings to default settings.
1. Power [On] the Digital Video Camera and switch to [Setting]
mode.
2. Press [4-way Direction] Button to select the [Default Setting]
item, then press OK Button or touch the screen to display
submenu.