BenQ M31 - LCD Brightness; Date;Time Stamp; Auto Power off

64
3. Press [4-way Direction] Button/ touch the screen to choose [V]
or [X], press OK Button or touch the screen to confirm.
6.5.6 LCD Brightness
This function is to adjust the brightness of LCD.
1. Turn [On] the Digital Video Camera and switch to [Setting]
mode.
2. Use [4-way Direction] Button to select the [LCD Brightness] item,
then press OK Button or click the screen to confirm.
3. Use [4-way Direction] Button to select [Low], [Medium], or [High],
then press OK Button or touch the screen to confirm the setting.
6.5.7 Date/Time Stamp
This function is to stamp date/time on photos.
1. Turn [On] the Digital Video Camera and switch to [Setting]
mode.
2. Press [4-way Direction] Button to select the [Date/Time Stamp]
item, press OK Button to display submenu; or touch the screen
to select the item.
3. Use [4-way Direction] Button to choose [Off], [Date], or
[Date/Time], press OK Button or touch the screen to confirm the
setting.
6.5.8 Auto Power Off
This function is to power off the Digital Video Camera to save energy
after it is not in use for several minutes.
1. Power [On] the Digital Video Camera and switch to [Setting]
mode.
2. Press [4-way Direction] Button to select the [Auto Power Off]
item, then press OK Button or touch the screen to display
submenu.