BenQ MX768 - Page 29

Operation
29
• Using the projector or remote control
Press / / / to display the 2D
Keystone page. Press / to adjust vertical values from -30
to 30. Press / to adjust horizontal values from -25 to 25.
•Using the OSD menu
1. Press MENU/EXIT and select the
DISPLAY
menu.
2. Press to select 2D Keystone and press
MODE/ENTER.
3. Press / / / to adjust the keystone values.
•Using the QUICK INSTALL key
1. Press QUICK INSTALL on the remote control.
2. Press to select 2D Keystone and press
MODE/ENTER.
3. Press / / / to adjust the keystone values.
Adjusting corner fit
Manually adjust four corners of the image by setting the horizontal and vertical values.
•Using the OSD menu
1. Select Corner Fit in the
DISPLAY menu and
press MODE/ENTER.