BenQ W2000+ - Advanced OSD Menu Structure

Menu Functions
45
Advanced OSD menu structure
The OSD menus vary according to the signal type selected.
Picture Mode
Bright/Vivid/Cinema (REC. 709)/Game/User 1/User 2/3D/ISF Night/ISF
Day
User Mode
Management
Load Settings From
Rename User Mode
Picture
Brightness 0–100
Contrast 0–100
Color 0–100
Tint 0–100
Sharpness 0–15
Color Temperature Normal/Cool/Lamp Native/Warm
Lamp Power
Normal/Economic/SmartEco
Black Level 0 IRE/7.5 IRE
Gamma Selection 1.6/1.8/2.0/2.1/2.2/2.3/2.4/2.6/2.8/BenQ
Brilliant Color On/Off
Advanced...
Color Temperature Fine
Tuning
Red Gain/Green Gain/Blue Gain/Red Offset/
Green Offset/Blue Offset
Reset Current Picture
Color Management Primary Color/Hue/Saturation/Gain
Noise Reduction 0–31
Film Mode On/Off
Mode
Reset/Cancel
Effect Mode Standard/Cinema/Music/Game/Sport/User
Sound Mode
User EQ 100 Hz/300 Hz/1k Hz/3k Hz/10k Hz
Audio Setup
Display
Mute On/Off
Volume 0-20
L/R Switch (W2000+ only) On/Off
Power On/Off Ring Tone On/Off
Reset Audio Settings Reset/Cancel
Aspect Ratio Auto/4:3/16:9/Wide/Letter Box
Wall Color Off/Light Yellow/Pink/Light Green/Blue
Image Position
Overscan Adjustment 0/1/2/3
H. Size
PC & Component
YPbPr Tuning
3D
Phase
Auto
3D Mode
Auto/3D Off/Frame Sequential/Frame
Packing/Top-Bottom/Side-by-Side
3D Sync Invert Invert
Main menu Submenu Options