41
Programming from the LED Keypad
Events
1. Enter a Parameter Number from 919 – 1720 (refer to Tab. 12), then press
E.
2. Enter the Event Code, then press
E.
IMPORTANT - The Event Codes are Decimal Codes (accepted entries:
0 through 255). The DECIMAL – HEXADECIMAL Conversion Table can
be found at the end of this Manual.
1. Enter a Parameter Number from 920 – 1721 (refer to Tab. 12 for details),
then press E.
2. Using keys
0 to 8, assign the Telephone Number to the Event.
1. Enter a Parameter Number from 921 – 1722 (refer to Tab. 12 for details),
then press
E.
2. Using keys
0 to 7, assign the respective Voice Message (refer to Tab. 12
for details), then press
E.
Example: Press 0 to assign Message 01, 1 to assign Message 02, etc.
()*
+
)*
!
', "
',#
)
" #
()
+&
)+
$% "&
"&'
1)*
(#
()*
+
1)
%(# !
', "
',#
1))
%(# #
()
+&
)+
Setting up the
Events
Assigning
Telephone Numbers
Assigning Messages
to Events
To Next Page