Telephone numbers
The B-TEL99 can store 7 telephone numbers for each alarm channel: each
number can have up to 15 digits and one or more pauses of 1 and/or 5 sec-
onds (e.g. between the area code and the phone number).
Default setting The B-TEL99 has no default telephone numbers.
Programming To program the first number for alarm channel 1 proceed as follows:
Access the programming phase ...
è
1
Press a. a
è
2
Press 1. 1
è
3
Press 1 again. 1
è
4
Wait for the point on the display to start
blinking slowly, and then enter the digits of
the telephone number. Press a to enter
pauses of 1 second, and b to enter
pauses of 5 seconds.
0
7
a b
7
1
1
4
9
0
è
5
Press c to stepback, and to cancel any
wrong digits.
c
c
c
è
6
Press e to enter and confirm the
telephone number.
e
è
To store the remaining alarm channel 1 telephone numbers, follow steps 1
and 2 of the previously described procedure, but at step 3 press the key
which corresponds to the required telephone number (2 through 7).
20 Telephone dialler B-TEL99
To Next Page
Loading...