Bentel B-TEL99 - Option 6) Voice Answer Detection

Option 6) Voice answer detection
This option may have 3 values:
Ø Value [1]: Voice answer detection enabled without redialling of success-
ful calls during the successive cycles.
+
For example, if alarm channel 2 goes into alarm status, and is set for 3 call
cycles, the B-TEL99 will call the first enabled telephone number assigned
to alarm channel 2.
With this function mode, if the first telephone number dialled is successful
it will not be dialled during the successive call cycle.
Ø Value [2]: Voice answer detection enabled with redialling of successful
calls.
+
If the number of call cycles (option 2) is set as 1 there will be no difference
between the two above mentioned settings.
Ø Value [3]: Voice answer detection disabled with 5 second message de-
lay after dialling.
Default setting Voice answer detection enabled without redialling of successful calls
(value 1).
To set the "Voice answer detection" option proceed as follows.
Access the programming phase ...
1
Press a. a
è
2
Press b. b
è
3
Press 6 (option number). 6
è
4
Select the required setting as follows:
1 = Voice answer detection enabled
without redialling of successful calls;
2 = Voice answer detection enabled with
redialling of successful calls;
3 = Voice answer detection disabled.
If 1 is selected ...
1
è
5
Press e to confirm and quit. e
è
28 Telephone dialler B-TEL99