3
Bentone B55/B65
Table of contents
1. GENERAL ________________________________________________________________________________________________8
1.1 Description B55/B65 __________________________________________________________________________8
2. TECHNICAL DATA ________________________________________________________________________________10
2.1 Type designation B55-2H/B55-2/B55-2R/B55-3R/
B65-2H/B65-2/B65-2R/B65-3R ________________________________________________________ 10
2.2 Dimensions _____________________________________________________________________________________10
2.3 Recommended nozzle and pressure __________________________________________________10
2.4 Output range and nozzles recommended ___________________________________________10
2.5 Working field ___________________________________________________________________________________ 11
2.6 Nozzle table ____________________________________________________________________________________12
2.7 Nozzle table ____________________________________________________________________________________13
3. INSTALLATION ______________________________________________________________________________________14
3.1 Acceptance inspection _____________________________________________________________________14
3.2 Preparations for installation _______________________________________________________________14
3.3 Distribution of oil ______________________________________________________________________________14
3.4 Electrical connections _______________________________________________________________________ 14
3.5 Choice of nozzle ______________________________________________________________________________14
3.6 Setting of the brake plate and air flow_________________________________________________14
3.7 Burner installation ____________________________________________________________________________15
3.7.1 Hole pattern _______________________________________________ 15
3.8 Installing the burner __________________________________________________________________________15
3.9 Oil lines ___________________________________________________________________________________________15
3.10 Electrical connections _______________________________________________________________________15
4. BASIC SETTINGS _________________________________________________________________________________ 16
4.1 Typical basic settings for B65-2H/B65-2
B65-2R/B65-3R ______________________________________________________________________________16
4.2 Set values for nozzle assembly B55 ___________________________________________________17
4.3 Set values for nozzle assembly B65 ___________________________________________________17
4.4 Set values for air damper B55 ___________________________________________________________17
4.5 Set values for air damper B65 ___________________________________________________________17
4.6 Nozzle assembly regulation – fixed brake plate ____________________________________18
4.7 Nozzle assembly regulation – adjustable brake plate ____________________________18
4.8 Hydraulic air adjustment ___________________________________________________________________18
4.9 Damper motor 2-Stage _____________________________________________________________________ 19
4.10 Damper motor 3-Stage _____________________________________________________________________ 20
5. MAINTENANCE ____________________________________________________________________________________21
5.1 Servicing the burner device ______________________________________________________________21
5.2 Adjusting the ignition electrodes and brake plate _________________________________21
5.3 Servicing the air damper ___________________________________________________________________22
5.4 Replacing the damper motor _____________________________________________________________22
5.5 Replacing the oil pump B55/B65 _______________________________________________________23
To Next Page
Loading...
